Ceramic advertising mug customization 8 glazing process

There are the following steps: inspecting the raw material applying water measuring the concentration removing the glaze applying the glaze drying brushing the glaze clearing the feet

1. Inspection of prime tires: inspect the prime tires one by one, and eliminate unqualified prime tires.

2. Watering: clear the ashes and water the qualified plain tires one by one, so that the glaze can be tightly combined on the plain tires.

3. Measure the concentration: Stir the glaze slurry in the glaze vat evenly, and use the concentration meter to measure the appropriate concentration.

4. Scouring the glaze: Use a basket to scoop out the impurities mixed in the glaze slurry of the glaze vat to ensure the quality of the glaze.

5. Glazing: Glaze by rinsing glaze, dipping glaze and other methods, so that the inside and outside of the plain tire are glazed.

6. Drying: Put the glazed glaze body in a place with a certain temperature for drying.

7. Brushing glaze: In order to achieve the required thickness of the glaze layer, a layer of glaze is applied on the dried glaze body.

8. Cleaning the feet: remove the excess glaze on the feet of the glaze body and other places.

1


Post time: Jan-07-2023

Newsletter

Follow us

  • a1
  • 2
  • 3
  • 1
  • 5